Measurement and characterization of ambient air pollutants in selected industrial areas of Kaduna, Nigeria
Keywords:
Air pollution, Particulate matter, Gaseous pollutants, WHO standards, Kaduna StateAbstract
Air pollution from industrial sources is a critical environmental and public health concern in Nigeria. This study measured concentrations of gaseous pollutants (CO, NO, NO2, SO2, H2S, NH3) and particulate matter (PM1.0, PM2.5, PM10) in selected industrial areas of Kaduna Metropolis, Northwestern Nigeria. Five major stationary emission sources Kaduna Refinery, Indomie Factory, Hikman Gas Plant, PZ Cusson Factory, and A.A. Rano Diesel Plant were sampled at distances of 10--100 m from emission points. Results showed that pollutant concentrations decreased exponentially with distance due to atmospheric dispersion. Comparisons with WHO 24-hour guideline limits(CO: 4.00 μg/m3; PM2.5: 5.00 μg/m3; PM10: 20.00 μg/m3) revealed significant exceedances at four functional sites. At Indomie Factory, CO (18.71 μg/m3) and PM2.5 (32.95 μg/m3) exceeded limits by factors of 4.7 and 6.6. At Hikman Gas Plant, CO (15.30 μg/m3) and PM2.5 (24.55 μg/m3) exceeded limits by factors of 3.8 and 4.9. At PZ Cusson Factory, CO (16.18 μg/m3) and PM2.5 (32.45 μg/m3) exceeded limits by factors of 4.0 and 6.5. At A.A. Rano Diesel Plant,(17.96 μg/m3) and PM2.5 (27.89 μg/m3) exceeded limits by factors of 4.5 and 5.6. PM10 at Indomie Factory (60.07 μg/m3) exceeded the WHO limit by a factor of 3. The non-operational Kaduna Refinery recorded values within permissible limits. Diesel generator exhaust was identified as the major contributor (CO--PM2.5: r = 0.82, p < 0.01). The study recommends routine monitoring, cleaner energy adoption, and stricter enforcement of air quality standards.
Published
How to Cite
Issue
Section
Copyright (c) 2026 J. Lawal, A. A. Tyovenda, H. Lawal, M. U. Sarki, J. A. Lawal, D. A. Ismaila, D. S. Igba

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Similar Articles
- O. B. Ayoade, M. O. Raji, A. A. Akindele, K. J. Yusuf-Mashopa, M. F. Abdulrauf, I. A. Raji, F. B. Musah, Hyperparameter optimisation for support vector machine-based disease detection in maize leaf variants , African Scientific Reports: Volume 4, Issue 3, December 2025
- A. M. Magomya, U. V. Elisha, Removal of Azo Dye (Acid Red 18) from Aqueous Solution using a Bioadsorbent from Carica Papaya Peels , African Scientific Reports: Volume 2, Issue 2, August 2023
- Akpata Erhieyovwe, Ernest Ojegu, Aroghene Edison Enaibe, Application of modified analytical embedded atom method to the study of lattice vibration in bcc transitional metals , African Scientific Reports: Volume 4, Issue 3, December 2025
- Folashade Mistura Jimoh, Adam Ajimoti Ishaq, Kazeem Issa, Approximate solution of higher-order oscillatory differential equations via modified linear block techniques , African Scientific Reports: Volume 4, Issue 2, August 2025
- R. Hamood, Samia Jamal, Zina A. Al Shadid, Mechanical Characterization of Armchair and Zigzag Single-walled Carbon Nanotube , African Scientific Reports: Volume 1, Issue 1, April 2022
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- P. R. Jubu, O. D. Abi, Z. S. Mbalaha, I. K. Nwokolo, A. O. Aransiola, C. Amakom, K. Udofia, A. A. Goje, I. I. Ayogu, D. S. Igba, M. M. Gururani, E. E. Oguzie, Numerical optimization of photovoltaic performance of cesium titanium bromide perovskite solar cells using dual copper oxide hole transport layers , African Scientific Reports: Volume 5, Issue 2, August 2026